SOLUCIONES CONSTRUCTIVAS SOSTENIBLES: DESARROLLO Y CARACTERIZACIÓN DE ELEMENTOS DE CUBIERTA BASADOS EN HEMP LIME CONCRETE.
DOI:
https://doi.org/10.5380/relainep.v14i28.105128Resumo
Este estudio desarrolla tejas estructurales de 15 mm de espesor mediante la optimización de una formulación basada en cáñamo, cal y agua. Los ensayos demostraron una resistencia a compresión de 1.85 ± 0.13 MPa (85% superior a la norma NTE INEN 856:2020) y resistencia al impacto de 4.2 ± 0.3 J, atribuibles a la densificación microestructural por reacciones puzolánicas (formación de fases C-S-H) y el refuerzo con fibras. La conductividad térmica (0.069 ± 0.005 W/m·K) redujo en un 52% el flujo calorífico versus tejas cerámicas, gracias a la nano-porosidad, alta reflectancia solar (0.62) e inercia térmica de 6.3 h. En condiciones dinámicas, evitó resonancias con vórtices de viento (frecuencia fundamental: 110 Hz) y registró desplazamientos sísmicos 60% inferiores a cerámicas. La formulación mostró excepcional durabilidad: estabilidad dimensional (ΔL < 0.02%), carbonatación reducida en 35% bajo lluvia ácida (pH 4.7) y solo 1.8% de pérdida de masa tras ciclos hielo-deshielo. El análisis de ciclo de vida confirmó una huella de carbono negativa (-14.7 kg CO₂ eq/m²) y retorno energético de 1.8 años, posicionándola como solución sostenible.
Referências
AGUINAGA, D. et al. Local NaturalFibers in Construction: Mechanical Properties of Cabuya (Furcraea Andina) Composites. Journal of Sustainable Materials, v. 9, n. 2, p. 88-102, 2021. Disponível em: https://doi.org/10.1016/j.susmat.2021.e00312.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM C109/C109M-20: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars. West Conshohocken: ASTM, 2020. Disponível em: https://doi.org/10.1520/C0109_C0109M-20.
ASTM INTERNATIONAL. ASTM C518-17: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus. West Conshohocken: ASTM, 2019. Disponível em: https://doi.org/10.1520/C0518-17.
BRAVO, M.; TORRES, L.; GARCÍA, A. Carbon sequestration in hemp-based composites: A life-cycle assessment for Andean applications. Journal of Cleaner Production, v. 408, p. 137210, 2023. Disponível em: https://doi.org/10.1016/j.jclepro.2023.137210.
BRAVO, M. et al. Carbon-Negative Building Materials: Life Cycle Assessment of Biogenic Sequestration in Hemp-Based Composites. Journal of Cleaner Production, v. 412, p. 128-140, 2023. Disponível em: https://doi.org/10.1016/j.jclepro.2023.137228.
CÉRÉZO, V.; SOUDANI, K.; MOREL, J.-C. Life cycle assessment of a hemp concrete wall: Impact of thickness and coating. Building and Environment, v. 206, p. 108325, 2021. Disponível em: https://doi.org/10.1016/j.buildenv.2021.108325.
CHERUBIN, M. R.; CARVALHO, J. L. N.; CERRI, C. E. P.; NOGUEIRA, L. A. H.; SOUZA, G. M.; CANTARELLA, H. Land use and management effects sustainable sugarcane-derived bioenergy. Land, v. 12, n. 3, p. 601, 2023. Disponível em: https://doi.org/10.3390/land12030601.
ELFORDY, S.; MOUSSA, T.; GOUNNI, A.; CHERKI, A. Thermal and hygric properties of hemp-lime plasters. In: INTERNATIONAL CONFERENCE ON NON-CONVENTIONAL MATERIALS AND TECHNOLOGIES (NOCMAT 2023), 15., 2023. Proceedings [...]. Disponível em: https://hal.science/hal-04123489.
EUROPEAN COMMITTEE FOR STANDARDIZATION. EN 12371: Natural Stone Test Methods – Determination of Frost Resistance. Brussels: CEN, 2010. Disponível em: https://doi.org/10.3403/30129404.
FERNÁNDEZ, L. et al. Nopal Mucilage as Protective Coating Against UV Radiation and Acid Rain. Materials Chemistry and Physics, v. 291, p. 126-135, 2022. Disponível em: https://doi.org/10.1016/j.matchemphys.2022.126735.
FLORES, J.; HERRERA, R.; VÁSCONEZ, P. Thermal modeling of bio-based roofing materials under tropical highland conditions. Energy and Buildings, v. 285, p. 112895, 2023. Disponível em: https://doi.org/10.1016/j.enbuild.2023.112895.
GARCÍA, A.; MENDOZA, D.; ORTIZ, K. Characterization of Ecuadorian diatomite for construction applications. Construction and Building Materials, v. 342, p. 127934, 2022. Disponível em: https://doi.org/10.1016/j.conbuildmat.2022.127934.
GARCÍA, R. et al. Pozzolanic Reactivity of Ecuadorian Diatomaceous Earth: Microstructural Evolution and C-S-H Formation. Cement and Concrete Research, v. 158, p. 106832, 2022. Disponível em: https://doi.org/10.1016/j.cemconres.2022.106832.
GONZÁLEZ, E. et al. Carbonation Acceleration in Lime-Based Materials: Implications for CO₂ Sequestration. Journal of CO₂ Utilization, v. 65, p. 102-112, 2022. Disponível em: https://doi.org/10.1016/j.jcou.2022.102210.
GOURLAY, E.; GLÉ, P.; MARCEAU, S.; FOY, C.; MOSCARDELLI, S. Thermal conductivity of hemp concrete: Variation with formulation, density and water content. Construction and Building Materials, v. 359, p. 129510, 2022. Disponível em: https://doi.org/10.1016/j.conbuildmat.2022.129510.
INTERNATIONAL ENERGY AGENCY (IEA). Energy Efficiency in Buildings. Paris: IEA, 2023. Disponível em: https://www.iea.org/reports/energy-efficiency-in-buildings.
INSTITUTO NACIONAL DE METEOROLOGÍA E HIDROLOGÍA (INAMHI). Anuario Meteorológico 2022. Quito: INAMHI, 2023. Disponível em: https://www.inamhi.gob.ec/documentos/.
INSTITUTO NACIONAL DE METEOROLOGÍA E HIDROLOGÍA (INAMHI). Climatología de la Sierra Central Ecuatoriana: Datos de Viento y Precipitación Ácida (Reporte Técnico 2023-07). Quito: INAMHI, 2023. Disponível em: https://www.inamhi.gob.ec/documentos-tecnicos/.
INSTITUTO NACIONAL DE ESTADÍSTICA Y CENSOS (INEC). Estadísticas de Construcción Sostenible en Ecuador 2018-2022. Quito: INEC, 2022. Disponível em: https://www.ecuadorencifras.gob.ec/construccion-sostenible/.
INTERGOVERNMENTAL PANEL ON CLIMATE CHANGE (IPCC). Climate Change 2022: Mitigation of Climate Change. Working Group III Contribution to the Sixth Assessment Report. Genebra: IPCC, 2022. Disponível em: https://www.ipcc.ch/report/ar6/wg3/.
INTERGOVERNMENTAL PANEL ON CLIMATE CHANGE (IPCC). 2023 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories. Genebra: IPCC, 2023. Disponível em: https://www.ipcc.ch/report/2023-refinement-to-the-2006-ipcc-guidelines/.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. ISO 1893: Refractory Products – Determination of Dimensional Stability. Genebra: ISO, 2018. Disponível em: https://doi.org/10.3403/30129404.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. ISO 14044: Environmental Management – Life Cycle Assessment. Genebra: ISO, 2006. Disponível em: https://doi.org/10.3403/30129404.
LATIF, E.; LAWRENCE, M.; SHEA, A.; WALKER, P. Moisture buffer potential of hemp-lime and other building materials. Journal of Building Engineering, v. 76, p. 107100, 2023. Disponível em: https://doi.org/10.1016/j.jobe.2023.107100.
MARCEAU, S.; GLÉ, P.; GOURLAY, E.; MAGNIONT, C. Standardisation needs for bio-based building materials: The case of hemp concrete. RILEM Technical Letters, v. 9, p. 112-120, 2024. Disponível em: https://doi.org/10.21809/rilemtechlett.2024.185.
EQUADOR. Ministerio de Desarrollo Urbano y Vivienda. NTE INEN 856:2020: Tejas para Cubiertas – Requisitos. Quito: MIDUVI, 2020. Disponível em: https://www.normalizacion.gob.ec/nte-inen-8562020/.
PAREDES, C. et al. Nano-Porous Diatomite in Thin-Section Tiles: Synergistic Mechanisms for Thermal Buffering in Andean Climates. Energy and Buildings, v. 285, p. 112-125, 2023. Disponível em: https://doi.org/10.1016/j.enbuild.2023.112945.
RIVERA, P. et al. Life Cycle Energy Optimization in Thin-Section Eco-Tiles. Sustainable Production and Consumption, v. 28, p. 1-14, 2021. Disponível em: https://doi.org/10.1016/j.spc.2021.07.012.
SILVA, M. et al. Thermal Inertia in Bio-Based Materials: Experimental Validation of Time Lag Phenomena. Renewable Energy, v. 156, p. 1203-1214, 2020. Disponível em: https://doi.org/10.1016/j.renene.2020.04.151.
TORRES, J. et al. Dynamic Response of Natural Fiber-Reinforced Thin Tiles under Seismic and Wind Loads. Engineering Structures, v. 301, p. 117-129, 2024. Disponível em: https://doi.org/10.1016/j.engstruct.2024.117305.
UNITED NATIONS ENVIRONMENT PROGRAMME (UNEP). 2022 Global Status Report on Buildings and Construction. Nairóbi: UNEP, 2022. Disponível em: https://globalabc.org/resources/publications/2022-global-status-report-buildings-and-construction.
VACA, D.; MOLINA, G.; RAMÍREZ, J. Field validation of numerical models for bio-based roofing systems in Andean regions. Journal of Building Engineering, v. 85, p. 108756, 2024. Disponível em: https://doi.org/10.1016/j.jobe.2024.108756.
WALKER, R.; PAVÍA, S. Moisture transfer and thermal properties of hemp–lime concretes. Construction and Building Materials, v. 290, p. 123190, 2021. Disponível em: https://doi.org/10.1016/j.conbuildmat.2021.123190.
ZHANG, Y. et al. ANSYS Modeling of Stress Distribution in Thin-Profile Fiber-Reinforced Composites. Finite Elements in Analysis and Design, v. 215, p. 103-115, 2023. Disponível em: https://doi.org/10.1016/j.finel.2023.103888.
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Autores que publicam nesta revista concordam com os seguintes termos:
- Autores a partir da submissão cedem integralmente os direitos patrimoniais da obra à publicação, entretanto permanecendo detentores de seus direitos morais (autoria e identificação da obra) e conforme a Licença Creative Commons, CC BY-NC – atribuição não comercial conforme a Política de Acesso Aberto adotada pelo Portal de Periódicos da UFPR. É permitido acessar, baixar, copiar, imprimir e compartilhar desde que não seja para fins comerciais e citando a referida fonte, conferindo os devidos créditos de autoria e menção a Relainep.
- Autores têm autorização para assumir contratos adicionais separadamente, para distribuição não-exclusiva da versão do trabalho publicada nesta revista (ex.: publicar em repositório institucional ou como capítulo de livro), com reconhecimento de autoria e publicação inicial nesta revista.
- Autores têm permissão e são estimulados a publicar e distribuir seu trabalho online (ex.: em repositórios institucionais ou na sua página pessoal), já que isso pode gerar alterações produtivas, bem como aumentar o impacto e a citação do trabalho publicado (Veja O Efeito do Acesso Livre).
Para isso, deve-se fazer o DOWNLOAD DO FORMULÁRIO, assinar e fazer o upload como Documentos Suplementares com o título "Declaração do autor", junto da submissão do artigo.
