ANALYSIS OF THE COST OF FOREST HARVESTING FOR THE PRODUCTION OF CHARCOAL FOR IRON AND STEEL INDUSTRY

Autores

  • Guilherme Carvalho Lana Wood Bio Energia
  • Romano Timofeiczyk Junior Universidade Federal do Paraná
  • Dimas Agostinho da Silva Universidade Federal do Paraná
  • Ricardo Anselmo Malinovski Universidade Federal do Paraná
  • David Alexandre Buratto Universidade Federal do Paraná

DOI:

https://doi.org/10.5380/rf.v48i4.49607

Palavras-chave:

Eucalyptus, production costs, charcoal production.

Resumo

This study aimed to analyze the production cost structure of the system of short logs, operating with the log lengths of 2.1 m, 3.7 m and 5.0 m and to determine which of the three log lengths enables a lower final cost in the production of charcoal. Data collected from a forestry company in the municipality of Paraopeba (state of Minas Gerais, Brazil) were used. An analysis of the cutting process, the transportation and the charcoal production was performed. The results showed that the hourly cost of the short log system is higher when using larger log lengths. The cost per unit quantities (cubic meters and tons) of treatments with longer logs is smaller due to its higher yield time. The system with logs of 5.0 m presents an inferior cost for the production of charcoal when compared to the same system with logs between 3.7 m and 2.1 m of length.

Biografia do Autor

David Alexandre Buratto, Universidade Federal do Paraná

Graduado em Engenharia Florestal pela Universidade do Estado de Santa Catarina (2010). Atualmente é mestrando em Engenharia Florestal na área de Silvicultura - Proteção Florestal pela Universidade Federal do Paraná. Atua principalmente nos seguintes temas: Silvicultura, Proteção florestal e Manejo Integrado de Pragas Florestais.

Downloads

Publicado

02-10-2018

Como Citar

Carvalho Lana, G., Timofeiczyk Junior, R., da Silva, D. A., Malinovski, R. A., & Buratto, D. A. (2018). ANALYSIS OF THE COST OF FOREST HARVESTING FOR THE PRODUCTION OF CHARCOAL FOR IRON AND STEEL INDUSTRY. Floresta, 48(4), 453–462. https://doi.org/10.5380/rf.v48i4.49607

Edição

Seção

Artigos