ENHANCEMENT OF THE CONVECTIVE COOLING OF TWO HEATERS IN A RECTANGULAR DUCT BY IMPINGING JETS

Autores

  • I. Marchi Neto Universidade Tecnológica Federal do Paraná
  • C. A. C. Altemani Universidade Estadual de Campinas

DOI:

https://doi.org/10.5380/reterm.v13i1.62069

Palavras-chave:

impinging jets, convective cooling, flush heaters, forced convection, pumping power

Resumo

A numerical investigation was performed to compare two alternative configurations for the convective air cooling of two heaters flush mounted on the lower horizontal wall of a rectangular duct. One configuration consisted of duct flow with uniform airflow velocity and temperature at the duct inlet and the heaters were located in the flow entrance region. In the other, the cooling was obtained by impinging air jets exiting with uniform velocity and temperature from two square holes on the upper duct wall just above the heaters. The simulations were performed under steady state conditions considering the three dimensional flow region of each configuration, where the conservation equations were solved. The results were presented in the form of the adiabatic Nusselt number and a dimensionless pressure drop for both configurations, in the range of the duct Reynolds number from 500 to 9,000.

Downloads

Publicado

2014-06-30

Como Citar

Marchi Neto, I., & Altemani, C. A. C. (2014). ENHANCEMENT OF THE CONVECTIVE COOLING OF TWO HEATERS IN A RECTANGULAR DUCT BY IMPINGING JETS. Revista Da Engenharia Térmica, 13(1), 48–53. https://doi.org/10.5380/reterm.v13i1.62069

Edição

v. 13 n. 1 (2014)

Seção

Science

Licença

Direitos Autorais para artigos publicados nesta revista são do autor, com direitos de primeira publicação para a revista. Em virtude da aparecerem nesta revista de acesso público, os artigos são de uso gratuito, com atribuições próprias, em aplicações educacionais e não-comerciais.